< img height="1" width="1" src="https://www.facebook.com/tr?id=8926480417404805&ev=PageView &noscript=1"/>
News

How to make the gantry hang still “standing” when the wind and rain comes

2023-11-26

The gantry crane brake device, when not in use, turn on the brake, so that the gantry crane is in this state, when the wind blows, it is able to resist a certain amount of wind. The driver of the gantry crane should not regularly maintain its braking performance, so that it can not lose its function.

Equipped with anti-slip pad, when bad weather comes, put the anti-slip pad near the wheel to prevent it from shaking back and forth, and eventually deviate from the track.

2. Necessary windproof accessories

Clasp rings, short bars, wire ropes, etc., are good ways. The clasp can be connected to the ground, and the lever can act as a support, which prevents the gantry crane from falling down.

Third, after the gantry crane stops, some important components are shielded, such as electric hoist, motor, etc., to avoid rain entering, so that the equipment is in oxidative corrosion, which will slowly affect the performance of the gantry crane. Turn on the rail clamp of the gantry crane, then turn off the power and cut off all circuits.

When the gantry crane encounters a typhoon, the shaking will be more severe, this time the safety is low, you must use some other ways to strengthen its stability, fix its four directions with steel wire rope, pull tight, open the clamp, cut off the power, and then use a few heavy stone pier around the wheel, after these two steps, the gantry crane can avoid being blown down in the wind.

Home Tel Mail Inquiry